Could microwave glazing be considered as an alternative to conventional surface finishing methods of ceramic materials in terms of color stability?

Basit Öğe Kaydı
dc.authorid0000-0002-2864-6589en_US
dc.contributor.authorŞanal, Fatma Ayşe
dc.contributor.authorKurt, Murat
dc.date.accessioned2021-06-23T19:54:17Z
dc.date.available2021-06-23T19:54:17Z
dc.date.issued2020
dc.departmentBAİBÜ, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalıen_US
dc.description.abstractPurpose:To examine microwave heating for the purpose of ceramic glazing as an alternative to conventional methods in terms of color stability. Materials and Methods: Thirty disk-shaped specimens (11 x 2 mm) of VITA VM 9, VITA VM 13, VITA VMK 95, and IPS e.max Ceram veneers were prepared (n = 30 each). The specimens were further divided into three subgroups according to surface finishing procedure (polishing, conventional oven glazing, or microwave glazing [n = 10 each]). The related surface finishing procedure was applied according to the manufacturers' instructions. Color differences (Delta E) of the ceramic samples stored in a coffee solution at 37 degrees C for 168 hours were determined using spectrophotometry. Data were analyzed using two-way ANOVA. The group differences were analyzed using Tukey HSD test. Results: Microwave-glazed specimens showed similar Delta E values to conventionally glazed specimens for the tested ceramics (P>.05). Polished specimens showed higher Delta E values than glazed specimens for the investigated ceramic materials, and the difference was significant for VITA VMK 95 and Vita VM9 (P <=.05). Conclusion: Microwave glazing has the advantage of decreasing glazing time to a few minutes and could be considered as an alternative method to conventional oven glazing and polishing with respect to color stability.en_US
dc.identifier.doi10.11607/ijp.6412
dc.identifier.endpage332en_US
dc.identifier.issn0893-2174
dc.identifier.issn1942-4426
dc.identifier.issue3en_US
dc.identifier.pmid32320187en_US
dc.identifier.scopus2-s2.0-85084026958en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage328en_US
dc.identifier.urihttps://doi.org/10.11607/ijp.6412
dc.identifier.urihttps://hdl.handle.net/20.500.12491/10488
dc.identifier.volume33en_US
dc.identifier.wosWOS:000528253700012en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.institutionauthorŞanal, Fatma Ayşe
dc.language.isoenen_US
dc.publisherQuintessence Publishing Co Incen_US
dc.relation.ispartofInternational Journal Of Prosthodonticsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMicrowave Glazingen_US
dc.subjectColor Stability
dc.titleCould microwave glazing be considered as an alternative to conventional surface finishing methods of ceramic materials in terms of color stability?en_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
fatma-ayse-sanal.pdf
Boyut:
469.2 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Protetik Diş Tedavisi Ana Bilim Dalı Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu