Application of ANOVA and Taguchi Methods for evaluation of the surface roughness of stellite-6 coating material

dc.authorid0000-0002-1377-9338en_US
dc.contributor.authorÖztürk, Sabri
dc.date.accessioned2021-06-23T19:36:39Z
dc.date.available2021-06-23T19:36:39Z
dc.date.issued2014
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the machinability of Stellite-6 coating was examined using a ceramic cutting tool. Orthogonal tube-cutting experiments were performed on a lathe and the data collected was evaluated by analysis of variance (ANOVA) to find out the percentage contributions of the key factors. Whisker reinforced ceramic inserts with ISO tool designations RNGN 1907 00T01020 were used for the machining trials and round type cutting tool inserts which are common in the manufacturing industry were chosen. Taguchi design of experiments was implemented to determine the optimal cutting parameters for analyzing the effects of the cutting speed and feed rate on the surface quality. Four cutting speeds and three feed rates were used during the turning operations to produce the regression model for Ra (average surface roughness) in terms of the actual parameter values. Hardness of the cutting inserts gets affected significantly at higher feed rate.en_US
dc.identifier.doi10.3139/120.110665
dc.identifier.endpage1020en_US
dc.identifier.issn0025-5300
dc.identifier.issue11-12en_US
dc.identifier.scopus2-s2.0-84918770611en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage1015en_US
dc.identifier.urihttps://doi.org/10.3139/120.110665
dc.identifier.urihttps://hdl.handle.net/20.500.12491/8031
dc.identifier.volume56en_US
dc.identifier.wosWOS:000345131900016en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÖztürk, Sabri
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofMaterials Testingen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectMaterials Testingen_US
dc.subjectCeramic Cutting Toolen_US
dc.subjectStellite-6en_US
dc.subjectAnalysis of Variance (ANOVA)en_US
dc.subjectFeed Rateen_US
dc.titleApplication of ANOVA and Taguchi Methods for evaluation of the surface roughness of stellite-6 coating materialen_US
dc.typeArticleen_US

Dosyalar