Application of ANOVA and Taguchi Methods for evaluation of the surface roughness of stellite-6 coating material
Küçük Resim Yok
Tarih
2014
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Carl Hanser Verlag
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
In this study, the machinability of Stellite-6 coating was examined using a ceramic cutting tool. Orthogonal tube-cutting experiments were performed on a lathe and the data collected was evaluated by analysis of variance (ANOVA) to find out the percentage contributions of the key factors. Whisker reinforced ceramic inserts with ISO tool designations RNGN 1907 00T01020 were used for the machining trials and round type cutting tool inserts which are common in the manufacturing industry were chosen. Taguchi design of experiments was implemented to determine the optimal cutting parameters for analyzing the effects of the cutting speed and feed rate on the surface quality. Four cutting speeds and three feed rates were used during the turning operations to produce the regression model for Ra (average surface roughness) in terms of the actual parameter values. Hardness of the cutting inserts gets affected significantly at higher feed rate.
Açıklama
Anahtar Kelimeler
Materials Testing, Ceramic Cutting Tool, Stellite-6, Analysis of Variance (ANOVA), Feed Rate
Kaynak
Materials Testing
WoS Q Değeri
Q4
Scopus Q Değeri
Q2
Cilt
56
Sayı
11-12
