Quantifying Cutting and Wearing Behaviors of TiN- and CrN-Coated AISI 1070 Steel

Basit Öğe Kaydı
dc.authorid0000-0002-7394-1499
dc.authorid0000-0001-8293-0022
dc.contributor.authorÇakan, Ahmet
dc.contributor.authorÖzkaner, Vedat
dc.contributor.authorYıldırım, Mustafa M.
dc.date.accessioned2021-06-23T19:21:03Z
dc.date.available2021-06-23T19:21:03Z
dc.date.issued2008
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractHard coatings such as titanium nitride (TiN) and chromium nitride (CrN) are widely used in cutting and forming tools against wear and corrosion. In the present study, hard coating films were deposited onto AISI 1070 steels by a cathodic arc evaporation plating ( CAVP) technique. These samples were subjected to wear in a conventional lathe for investigating the tribological behaviour of coating structure, and prenitrided subsurface composition was characterized using scanning electron microscopy (SEM), line scan analyses and X-ray diffraction ( XRD). The wear properties of TiN- and CrN-coated samples were determined using an on-line monitoring system. The results show that TiN- coated samples demonstrate higher wear resistance than CrN-coated samples.en_US
dc.identifier.doi10.3390/s8116984
dc.identifier.endpage6998en_US
dc.identifier.issn1424-8220
dc.identifier.issue11en_US
dc.identifier.pmid27873912en_US
dc.identifier.scopus2-s2.0-56449097177en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage6984en_US
dc.identifier.urihttps://doi.org/10.3390/s8116984
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6208
dc.identifier.volume8en_US
dc.identifier.wosWOS:000261215000012en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.institutionauthorÇakan, Ahmet
dc.language.isoenen_US
dc.publisherMdpien_US
dc.relation.ispartofSensorsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectTiN-coatingen_US
dc.subjectCrN-coatingen_US
dc.subjectCutting Performanceen_US
dc.subjectTool Wear On-line Monitoringen_US
dc.subjectCutting Forceen_US
dc.titleQuantifying Cutting and Wearing Behaviors of TiN- and CrN-Coated AISI 1070 Steelen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
ahmet-cakan.pdf
Boyut:
783.29 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu