Effects of hybrid POSS nanoparticles on the properties of thermoplastic elastomer-toughened polyamide 6

dc.authorid0000-0002-2708-6145
dc.authorid0000-0002-7546-6222
dc.contributor.authorYıldırım, Rümeysa
dc.contributor.authorUllah, Muhammad Saeed
dc.contributor.authorKoçoğlu, Hürol
dc.contributor.authorUn, Merve
dc.contributor.authorÇakır, Nazlı Yazıcı
dc.contributor.authorDemir, Gülşah
dc.contributor.authorÇetin, Duygu
dc.date.accessioned2024-09-25T20:01:33Z
dc.date.available2024-09-25T20:01:33Z
dc.date.issued2023
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümü en_US
dc.description.abstractIn this study, polyamide 6 (PA6)/thermoplastic elastomer (TPE) blends were prepared to decrease the notch sensitivity of PA6 for automotive applications, and the morphological, rheological, mechanical, and thermal properties of PA6/TPE blends, which are partially miscible or immiscible depending on the TPE ratio, were significantly improved in the existence of polyhedral oligomeric silsesquioxane (POSS) nanoparticles with multiple reactive epoxy groups as compatibilizers. An unstable phase morphology was obtained with the addition of TPE into PA6 without POSS nanoparticles, whereas interfacial interactions between phases in the presence of POSS were enhanced as a result of a significant decrease in the average particle size from 1.39 to 0.41 mu m. The complex viscosity value of the 70PA6/30TPE blend, which was 20 kPa/s(-1) at 0.1 rad/s angular frequency, reached 380 kPa/s(-1) with the addition of POSS due to the formation of long chains by the generation of graft and/or block copolymers, which resulted in a 65% increase in Young's modulus value. Most notably, the Izod impact strength of pure PA6, which was 10 kJ/m(2), increased by 290% with the incorporation of POSS. It was confirmed by FTIR analysis that the reactive multiple epoxy groups of MultEpPOSS and EPPOSS nanoparticles react with the proper groups of PA6 and/or TPE, and also, a partial hydrogen bonding interaction occurs between PA6-TPE from the shifting of N-H and carbonyl peaks. In conclusion, it can be suggested that POSS nanoparticles can serve as highly effective compatibilizers for PA6/TPE blends and have potential commercial applications, especially in the automotive sector.en_US
dc.description.sponsorshipT?rkiye Bilimsel ve Teknolojik Arastirma Kurumu [120M718]; Scientific and Technological Research Council of Turkey (TUBITAK)en_US
dc.description.sponsorshipThis study was granted by The Scientific and Technological Research Council of Turkey (TUBITAK; Project No: 120M718).en_US
dc.identifier.doi10.1021/acsomega.3c06896
dc.identifier.endpage47050en_US
dc.identifier.issn2470-1343
dc.identifier.issue49en_US
dc.identifier.pmid38107884en_US
dc.identifier.scopus2-s2.0-85179802599en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage47034en_US
dc.identifier.urihttps://doi.org/10.1021/acsomega.3c06896
dc.identifier.urihttps://hdl.handle.net/20.500.12491/14198
dc.identifier.volume8en_US
dc.identifier.wosWOS:001142993100001en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.institutionauthorKoçoğlu, Hürol
dc.institutionauthorid0000-0002-7546-6222
dc.language.isoenen_US
dc.publisherAmer Chemical Socen_US
dc.relation.ispartofAcs Omegaen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmzYK_20240925en_US
dc.subjectPolyamide
dc.subjectNanoparticles
dc.subjectBlock Copolymers
dc.subjectEpoxy Groups
dc.subjectInterfacial
dc.subjectHydrogen Bonding
dc.titleEffects of hybrid POSS nanoparticles on the properties of thermoplastic elastomer-toughened polyamide 6en_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
rumeysa-yıldırım.pdf
Boyut:
12.06 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text