The effect of allotropic transformation temperature in diffusion-welded low-carbon steel and copper

Basit Öğe Kaydı
dc.authorid0000-0002-6000-245Xen_US
dc.authorid0000-0002-8744-5082
dc.authorid0000-0002-1439-4683
dc.contributor.authorKurt, Adem
dc.contributor.authorUygur, İlyas
dc.contributor.authorMutlu, Ekrem
dc.date.accessioned2021-06-23T19:19:37Z
dc.date.available2021-06-23T19:19:37Z
dc.date.issued2006
dc.departmentAİBÜ Düzce Teknik Eğitim Fakültesien_US
dc.description.abstractDiffusion welding (DW) is a solid-state joining process, capable of joining a wide range of metal and ceramic combinations to produce both small and large components. In this study, low-carbon steel (AISI 1010) was joined to commercially pure copper by diffusion welding technique. Metallographic and mechanical examinations were carried out to determine the welding quality. Diffusion interfaces were investigated by scanning electron microscopy (SEM) and x-ray energy-dispersive spectroscopy (EDS) analysis in order to observe the effect of allotropic-transformation temperature on the amount of diffusing elements. It was found that Fe diffusion from AISI 1010 steel to copper at the transformation temperature of 845 degrees C was lower than the measurement at 770 degrees C. This low-diffusion amount at 845 degrees C was attributed to the consumption of the internal energy for the phase transformation. From the findings of this study, it can be concluded that the perfect diffusion welding can be done in the temperature just below the allotropic transformation. The shear strength in DW joints was also evaluated.en_US
dc.identifier.endpage52en_US
dc.identifier.issn1024-1809
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-33646344708en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage39en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12491/5974
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-33646344708&partnerID=40&md5=fffad1a4511140eae432ae96ad8e7d4d
dc.identifier.volume28en_US
dc.identifier.wosWOS:000237150100003en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorUygur, İlyas
dc.language.isoenen_US
dc.publisherNatl Acad Sciences Ukraine, Inst Metal Physicsen_US
dc.relation.ispartofMetallofizika I Noveishie Tekhnologiien_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDiffusionen_US
dc.subjectFeen_US
dc.subjectCuen_US
dc.subjectDiffusion Weldingen_US
dc.subjectAllotropyen_US
dc.titleThe effect of allotropic transformation temperature in diffusion-welded low-carbon steel and copperen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu