Mechanical and fatigue behavior of resistance spot welded dual-phase and twinning-induced plasticity steel joints
Küçük Resim Yok
Tarih
2022
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Asce-Amer Soc Civil Engineers
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
The new generation high-strength steel sheet has been widely used to reduce the vehicle weight. In this study, the mechanical, metallurgical, and fatigue behavior of the resistance spot-welded joints of high strength steel sheets were experimentally investigated. The Dual-Phase (DP) 800 and Twinning-Induced Plasticity (TWIP) 1000 steel sheets were joined together in three different nugget diameters. The welding current was parameterized to create three different nugget diameters. Hence, four groups of welded combining combinations were obtained. The tensile shear test was applied to the samples to study the effects of weld nugget diameter and different welded joint combination in terms of the joint strength. For long fatigue life tests, six test samples were prepared for each test series; in total, 24 tests have been conducted, in which S-N curves of the samples were extracted. Finally, the effect of different nugget diameters on the fatigue life of the welded joint combinations was investigated. (C) 2022 American Society of Civil Engineers.
Açıklama
The authors gratefully acknowledge the technical support provided by Tofas-Fiat R&D department.
Anahtar Kelimeler
Design Optimization, Life Estimation, Dual-Phase (DP), Twinning-Induced Plasticity, TWIP
Kaynak
Journal of Aerospace Engineering
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
35
Sayı
3
Künye
Doruk, E., Fındık, F., & Pakdil, M. (2022). Mechanical and fatigue behavior of resistance spot welded dual-phase and twinning-induced plasticity steel joints. Journal of Aerospace Engineering, 35(3), 04022007.
