The effect of amine-free initiator system and the polymerization type on color stability of resin cements

Basit Öğe Kaydı
dc.authorid0000-0001-5613-2027
dc.authorid0000-0003-3947-9007
dc.authorid0000-0002-2570-0877
dc.contributor.authorUral, Çağrı
dc.contributor.authorDuran, İbrahim
dc.contributor.authorTatar, Numan
dc.contributor.authorÖztürk, Özgür
dc.contributor.authorKaya, İsmail
dc.date.accessioned2021-06-23T19:43:32Z
dc.date.available2021-06-23T19:43:32Z
dc.date.issued2016
dc.departmentBAİBÜ, Diş Hekimliği Fakültesi, Protetik Diş Tedavisi Ana Bilim Dalıen_US
dc.description.abstractWe investigated the short-term (4 weeks) color stability of light-cure and dual-cure resin cements. Sixty disk-shaped test specimens of adhesive resin cement (10 x 1 mm) were prepared. One feldspathic porcelain test specimen (12 x 14 x 0.8 mm) was prepared from a prefabricated ceramic block. The feldspathic sample was placed on the resin cement disk and all the measurements were performed without cementation. Specific color coordinate differences (Delta L, Delta a, and Delta b), and the total color differences (Delta E) were calculated after immersion in distilled water for different periods. Data were compared using one-way analysis of variance (ANOVA) (alpha = 0.05). The test results revealed that different chemical structures and curing modes affected the Delta E values (P < 0.05). The highest Delta E values were obtained for RelyX Unicem dual-cure cement (2.14 +/- 0.40), and the lowest for NX3 light-cure cement (0.78 +/- 0.34). Third generation adhesive resin cement free of tertiary amines and benzoyl peroxide showed relatively slight color change in both test groups (light-cure and dual cure resin cement).en_US
dc.identifier.doi10.2334/josnusd.15-0619
dc.identifier.endpage161en_US
dc.identifier.issn1343-4934
dc.identifier.issn1880-4926
dc.identifier.issue2en_US
dc.identifier.pmid27349535en_US
dc.identifier.scopus2-s2.0-84982899584en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage157en_US
dc.identifier.urihttps://doi.org/10.2334/josnusd.15-0619
dc.identifier.urihttps://hdl.handle.net/20.500.12491/8799
dc.identifier.volume58en_US
dc.identifier.wosWOS:000378466200002en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.indekslendigikaynakPubMeden_US
dc.institutionauthorTatar, Numan
dc.language.isoenen_US
dc.publisherNihon Univ, School Dentistryen_US
dc.relation.ispartofJournal Of Oral Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectColor Stabilityen_US
dc.subjectPolymerizationen_US
dc.subjectResin Cementen_US
dc.titleThe effect of amine-free initiator system and the polymerization type on color stability of resin cementsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
58_15-0619.pdf
Boyut:
780.81 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Protetik Diş Tedavisi Ana Bilim Dalı Koleksiyonu
PubMed İndeksli Yayınlar Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu