Effect of porosity content on the weldability of powder metal parts produced by friction stir welding

Basit Öğe Kaydı
dc.authorid0000-0002-5132-4107en_US
dc.contributor.authorKurt, Adem
dc.contributor.authorUygur, İlyas
dc.contributor.authorAteş, Hakan
dc.date.accessioned2021-06-23T19:20:48Z
dc.date.available2021-06-23T19:20:48Z
dc.date.issued2007
dc.departmentBAİBÜ, Rektörlük, Diğer Yayınlaren_US
dc.descriptionPower Metallurgy World Congress and Exhibition 2006 -- SEP 24-28, 2006 -- Busan, SOUTH KOREAen_US
dc.description.abstractFriction stir welding technique (FSW) has many advantages in terms of tool design, rotational speed and traveling speed, and can be adjusted in a precise manner. It enables heat input into the system to be controlled. In this study, Aluminum powders were compacted at 350,400 and 450 MPa pressure and sintered at 450 degrees C temperature for 30 minutes in Ar atmosphere. Sintered powder metal parts were joined to each other by FSW at the speed of 1800 rpm and traveling welding speed 200 mm/min under a constant friction force. The results show that the amount of porosity affects the welclability of powder metallurgy (P/M) parts. Furthermore, the porosity and microstructural evolution of the Aluminum also affected the hardness values of the tested materials.en_US
dc.description.sponsorshipKorean Powder Metallurgy Insten_US
dc.identifier.doi10.4028/www.scientific.net/MSF.534-536.789
dc.identifier.endpage792en_US
dc.identifier.issn1662-9752
dc.identifier.scopus2-s2.0-38549161114en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage789en_US
dc.identifier.urihttps://doi.org/10.4028/www.scientific.net/MSF.534-536.789
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6172
dc.identifier.volume534-536en_US
dc.identifier.wosWOS:000244522400197en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorUygur, İlyas
dc.language.isoenen_US
dc.publisherTrans Tech Publications Ltden_US
dc.relation.ispartofProgress In Powder Metallurgy, Pts 1 And 2en_US
dc.relation.ispartofseriesMaterials Science Forum
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectFriction stir weldingen_US
dc.subjectAluminiumen_US
dc.subjectPowder metallurgyen_US
dc.subjectPorosityen_US
dc.titleEffect of porosity content on the weldability of powder metal parts produced by friction stir weldingen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makale Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu