Comparison of vickers microhardness of undoped and ru doped BSCCO glass ceramic materials

Basit Öğe Kaydı
dc.authorid0000-0001-7893-344Xen_US
dc.authorid0000-0001-6079-7048en_US
dc.authorid0000-0001-9450-6499en_US
dc.authorid0000-0002-0412-5789en_US
dc.contributor.authorÖztürk, Özgür
dc.contributor.authorAşıkuzun, Elif
dc.contributor.authorTaşçı, Ahmet Tolga
dc.contributor.authorGökçen, Tuğba
dc.contributor.authorAda, Hakan
dc.contributor.authorKoralay, Haluk
dc.contributor.authorÇavdar, Şükrü
dc.date.accessioned2021-06-23T19:49:53Z
dc.date.available2021-06-23T19:49:53Z
dc.date.issued2018
dc.departmentBAİBÜ, Fen Edebiyat Fakültesi, Fizik Bölümüen_US
dc.description.abstractIn this study, effect of substitution ratio on the mechanical and structural properties of Bi1-xRuxPb0.2Sr2CaCu2O10+delta system, that is prepared in the ratios of x = 0.0, 0.025, 0.050, 0.075, is investigated. Samples are prepared with glass ceramic method and sintered at 845 A degrees C. XRD and SEM measurements are performed for structural analyses, and Vickers micro-hardness measurements are carried out at different applied load (0.245 <= F <= 2.940 N) in order to investigate the mechanical performance of the Ru doped Bi1-xRuxPb0.2Sr2CaCu2O10+delta system. Experimental results of Vickers micro-hardness analyses are performed using the Meyer's law, the proportional samples resistance model, the elastic/plastic deformation model, the Hays-Kendall approach and the indentation induced cracking (IIC) model. All analyses results are exhibited reverse indentation size effect behavior. The measured hardness values increase with increasing the applied load. Finally, IIC model is determined as the most successful model describing the mechanical properties of our samples.en_US
dc.identifier.doi10.1007/s10854-017-8336-x
dc.identifier.endpage3966en_US
dc.identifier.issn0957-4522
dc.identifier.issn1573-482X
dc.identifier.issue5en_US
dc.identifier.scopus2-s2.0-85038087229en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage3957en_US
dc.identifier.urihttps://doi.org/10.1007/s10854-017-8336-x
dc.identifier.urihttps://hdl.handle.net/20.500.12491/9645
dc.identifier.volume29en_US
dc.identifier.wosWOS:000424338500050en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorAşıkuzun, Elif
dc.language.isoenen_US
dc.publisherSpringeren_US
dc.relation.ispartofJournal Of Materials Science-Materials In Electronicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectBSCCOen_US
dc.titleComparison of vickers microhardness of undoped and ru doped BSCCO glass ceramic materialsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
ozgur-ozturk.pdf
Boyut:
1.37 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Fizik Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu