Effects of temperature on the weldability of powder metal parts joined by diffusion welding

Basit Öğe Kaydı
dc.authorid0000-0002-5132-4107en_US
dc.authorid0000-0002-8744-5082
dc.contributor.authorKurt, Adem
dc.contributor.authorUygur, İlyas
dc.contributor.authorAteş, Hakan
dc.date.accessioned2021-06-23T19:20:35Z
dc.date.available2021-06-23T19:20:35Z
dc.date.issued2007
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.descriptionBeijing International Materials Week -- JUN 25-30, 2006 -- Beijing, PEOPLES R CHINAen_US
dc.description.abstractDiffusion welding is an advanced bonding process in which similar or dissimilar materials can be bonded in solid state. In this study, aluminium composite (5% and 15% WC) powders were compacted at 450 MPa pressure and sintered at 550 degrees C for 45 minutes in argon atmosphere.and joined each other by diffusion bonding. The bonding temperatures (585 degrees C, 600 degrees C, 615 degrees C) and dwell time (185 min) were chosen for the welding process at constant 20 MPa. It has been observed that these variations on the welding parameter strongly affected the microstructure and the weldability of the materials.en_US
dc.description.sponsorshipChinese Mat Res Soc, European Mat Res Soc, Gen Res Inst Nonferrous Metals, Pulead Technol Ind Co Ltd, Shanshan Technol Grp, Chongqing Univ, China Magnesium Ctr, Minist Sci & Technol China, Natl Dev & Reform Commiss China, Minist Educ China, Minist Informat Ind China, Natl Nat Sci Fdn China, Chinese Acad Engn, China Assoc Sci & Technol, Int Union Mat Res Socen_US
dc.identifier.doi10.4028/www.scientific.net/MSF.546-549.667
dc.identifier.endpage670en_US
dc.identifier.isbn978-0-87849-432-3
dc.identifier.issn1662-9752
dc.identifier.scopus2-s2.0-38349164099en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage667en_US
dc.identifier.urihttps://doi.org/10.4028/www.scientific.net/MSF.546-549.667
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6137
dc.identifier.volume546-549en_US
dc.identifier.wosWOS:000246145501014en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorUygur, İlyas
dc.language.isoenen_US
dc.publisherTrans Tech Publications Ltden_US
dc.relation.ispartof2006 Bimw: 2006 Beijing International Materials Week, Pts 1-4: Magnesiumen_US
dc.relation.ispartofseriesMaterials Science Forum
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDiffusion weldingen_US
dc.subjectAluminiumen_US
dc.subjectWelding temperatureen_US
dc.subjectPowder metallurgyen_US
dc.titleEffects of temperature on the weldability of powder metal parts joined by diffusion weldingen_US
dc.typeConference Objecten_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu