Optimization of MQL parameters using the Taguchi method in milling of nickel based Waspaloy

Basit Öğe Kaydı
dc.authorid0000-0002-0763-807Xen_US
dc.authorid0000-0001-6100-0731en_US
dc.authorid0000-0002-8744-5082
dc.contributor.authorYıldırım, Çağrı Vakkas
dc.contributor.authorKıvak, Turgay
dc.contributor.authorErzincanlı, Fehmi
dc.contributor.authorUygur, İlyas
dc.contributor.authorSarıkaya, Murat
dc.date.accessioned2021-06-23T19:49:10Z
dc.date.available2021-06-23T19:49:10Z
dc.date.issued2017
dc.departmentBAİBÜ, Gerede Meslek Yüksekokulu, Makine Ve Metal Teknolojileri Bölümüen_US
dc.description.abstractThis study aimed to investigate the effect of the minimum quantity lubrication (MQL) parameters such as cutting oil type, flow rate, milling method, pulverization distance and nozzle type on average surface roughness (Ra) in milling of nickel based Waspaloy super alloy. During milling experiments, constant cutting speed (45 m/min), feed rate (0.1 mm/rev) and depth of cut (0.5 mm) were selected as machining parameters. Four different types of oil (vegetable, synthetic, mineral and mineral-synthetic), four different flow rates (25, 50, 75 and 100 ml/h), two different milling methods (down milling and up milling) two pulverization distances (25 and 50 mm) and two different nozzle types were chosen as MQL parameters. The results were analyzed using 3D surface graphs, signal-to-noise ratio (S/N) and main effect graphs of means. Optimal MQL parameters were determined using the S/N ratio. Mathematical models have been created for surface roughness. The analysis results indicated that the dominant factors were oil type and flow ratio on surface roughness. In addition, confirmation test results showed that the Taguchi method was very successful in the optimization of MQL parameters in order to obtain minimum surface roughness in milling of Waspaloy super alloy.en_US
dc.identifier.endpage186en_US
dc.identifier.issn2147-1762
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-85021088259en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage173en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12491/9397
dc.identifier.urihttps://dergipark.org.tr/en/pub/gujs/issue/30799/333122
dc.identifier.volume30en_US
dc.identifier.wosWOS:000405869900013en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorYıldırım, Çağrı Vakkas
dc.language.isoenen_US
dc.publisherGazi Univen_US
dc.relation.ispartofGazi University Journal Of Scienceen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectWaspaloyen_US
dc.subjectMillingen_US
dc.subjectMQLen_US
dc.subjectSurface Roughnessen_US
dc.subjectOptimizationen_US
dc.titleOptimization of MQL parameters using the Taguchi method in milling of nickel based Waspaloyen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
cagri-vakkas-yildirim.pdf
Boyut:
997.16 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Ve Metal Teknolojileri Bölümü
Scopus İndeksli Yayınlar Koleksiyonu