Analysis of usability in furniture production of wood plastic laminated board
Yükleniyor...
Tarih
2015
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
North Carolina State Univ Dept Wood & Paper Sci
Erişim Hakkı
info:eu-repo/semantics/openAccess
Özet
The objective of this study was to manufacture a lightweight and easily producible wood plastic laminate (WPL) board that could be used in the furniture sector. Eastern beech (Fagus orientalis L.) veneer papels (A) and hollow polycarbonate boards (B), both with a thickness of 4 mm, were laminated in different combinations using polyurethane (PUR) and polychloroprene (PCR) adhesives. The physical and mechanical properties of the WPL boards obtained were determined according to the principles specified in the EN 326-1, EN 317, EN 310, ASTM D1037, and ASTM D1761 standards. Subsequently, the specimens were compared with particle boards (PB), medium density fiberboards (MDF), and okoume plywoods (PW). According to the results, the AABAA, ABABA, and ABBBA combinations of the WPL materials had better physical properties, such as weight, water absorption, and swelling thickness, compared to the other composites. Furthermore, because the WPL materials had a high bending resistance, modulus of elasticity, and nail and screw withdrawal strength, they could be used instead of PB and MDF. The WPL material obtained within the scope of this study are suitable for furniture making.
Açıklama
Anahtar Kelimeler
Wood Plastic, Composite Material, Furniture Production, Physical Mechanical Properties
Kaynak
Bioresources
WoS Q Değeri
Q1
Scopus Q Değeri
Q3
Cilt
10
Sayı
3