Examination of effective nucleation centers for flux pinning of vortices and optimum diffusion annealing temperature for Au-diffusion-doped Bi-2212 polycrystalline compound

Basit Öğe Kaydı
dc.authorid0000-0002-0759-0598en_US
dc.authorid0000-0002-5177-3703en_US
dc.authorid0000-0002-1821-0722
dc.authorid0000-0001-8058-1690
dc.contributor.authorSarıtekin, Namık Kemal
dc.contributor.authorPakdil, Murat
dc.contributor.authorBekiroğlu, Erdal
dc.contributor.authorYıldırım, Gürcan
dc.date.accessioned2021-06-23T19:42:43Z
dc.date.available2021-06-23T19:42:43Z
dc.date.issued2016
dc.departmentBAİBÜ, Fen Edebiyat Fakültesi, Fizik Bölümüen_US
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
dc.departmentBAİBÜ, Mühendislik Fakültesi, Elektrik Elektronik Mühendisliği Bölümü
dc.description.abstractThis comprehensive study declares experimentally the effect of diffusion annealing temperature in a range of 600 degrees C-850 degrees C on the electrical, superconducting and microstructural properties of the Au-diffusion-doped Bi-2212 polycrystalline compounds with the aid of the available experimental methods such as bulk density, dc resistivity (rho-T), transport critical current density (J(c)), X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and electron dispersive X-ray (EDX) measurements. The experimental findings of the dc electrical resistivity and XRD investigations present that the Au impurities are effectively entered into the crystalline structure of the Bi-2212 system. In fact, the EDX examinations confirm that the Au impurities may mostly be substituted for the Sr-sites in the Bi-2212 crystal matrix due to the increase of electronegativity. Besides, the J(c) measurements present that highly dispersed Au impurities with higher electronegativity bind tightly to form the effective nucleation centers through the intra-grain and inter-grain boundaries for the flux pinning of the vortices in the Bi-2212 crystal structure. Furthermore, it is observed that the vital characteristics, being responsible for newly/novel and feasible market areas for the universe economy, improve significantly with the increment in the diffusion annealing temperature up to the value of 800 degrees C as a consequence of the retrogression in the disorders, dislocations, defects, lattice strains, misorientations and local structural distortions in the Cu-O-2 consecutively stacked layers, leading to the development of the metastability (enhancement of the hole trap energy) belonging to the superconducting materials studied. However, after the critical temperature point, the properties recrudesce dramatically due to the penetration of excess Au foreign impurities in the Bi-2212 crystal structure. In more details, the XRD measurement findings display that the diffusion annealing temperature promotes significantly the high phase as a consequence of the increment in both the average crystallite size and c-axis length or decrement in the constant parameter a. In this respect, the solid compound produced at the annealing temperature of 800 degrees C obtains the maximum (minimum) c-axis length of 35.43 angstrom (5.32 angstrom) and average grain size of 68.7 nm. Similarly, the same sample exhibits the smoothest and densest surface morphology with the best interaction between the superconducting grains and largest crystalline distribution. Finally, the highest T-c(onset) and T-c(offset) values are noted to be about 89.78 K and 89.01 K, respectively. This is attributed to the fact that the Au nanoparticles penetrated transit from inherently overdoped nature of the Bi-2212 compound to optimally doped state. To sum up, the annealing temperature of 800 degrees C favors the Bi-2212 superconducting ceramics for usage in the large scale applications. (C) 2016 Elsevier B.V. All rights reserved.en_US
dc.identifier.doi10.1016/j.jallcom.2016.07.203
dc.identifier.endpage646en_US
dc.identifier.issn0925-8388
dc.identifier.issn1873-4669
dc.identifier.scopus2-s2.0-84979762818en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage637en_US
dc.identifier.urihttps://doi.org/10.1016/j.jallcom.2016.07.203
dc.identifier.urihttps://hdl.handle.net/20.500.12491/8587
dc.identifier.volume688en_US
dc.identifier.wosWOS:000384439000080en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorSarıtekin, Namık Kemal
dc.institutionauthorPakdil, Murat
dc.institutionauthorBekiroğlu, Erdal
dc.institutionauthorYıldırım, Gürcan
dc.language.isoenen_US
dc.publisherElsevier Science Saen_US
dc.relation.ispartofJournal Of Alloys And Compoundsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectDiffusion Mechanismen_US
dc.subjectAnnealing Temperatureen_US
dc.subjectAu-diffusion-doped Bi-2212 Ceramicsen_US
dc.subjectBipolaronen_US
dc.subjectXRDen_US
dc.subjectSEMen_US
dc.subjectEDXen_US
dc.titleExamination of effective nucleation centers for flux pinning of vortices and optimum diffusion annealing temperature for Au-diffusion-doped Bi-2212 polycrystalline compounden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
namik-kemal-saritekin.pdf
Boyut:
2.53 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/ Full text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Elektrik Elektronik Mühendisliği Bölümü Koleksiyonu
Fizik Bölümü Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu