Mechanical properties of laminated veneer lumber made from ash and red pine woods

Basit Öğe Kaydı
dc.authorid0000-0001-5133-683X
dc.contributor.authorİlçe, Abdullah Cemil
dc.date.accessioned2021-06-23T19:50:05Z
dc.date.available2021-06-23T19:50:05Z
dc.date.issued2018
dc.departmentBAİBÜ, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümüen_US
dc.description.abstractThe purpose of this study was to determine the best laminated veneer lumber (LVL) in terms of the density, modulus of rupture (MOR), and elasticity (MOE). This study was planned as a laboratory work for non-structural purpose. LVL were formed with five different layer arrangements (APPPPPA, APPAPPA, APAPAPA, AAPPPAA, and AAPAPAA) using 3-mm thick ash (A) (Fraxinus angustifolia Vahl) and Turkish red pine (P) (Pinus burita Ten.) veneers. Accordingly, the LVL materials (12% +/- 0.5 moisture level) were made and polyvinyl acetate was preferred for bonding the veneers because it was very easy to apply in laboratory applications. The test specimens were conditioned at a relative humidity of 65% +/- 2% and temperature of 20 degrees C +/- 2 degrees C, until attaining a constant mass, at every stage of wood sheets production and before testing. The density, MOR, and MOE tests were conducted according to the conditions specified in different standards. The results confirmed that, as the amount of the solid ash material increased in the LVL, the material had values closer to those of solid ash sample. Additionally, as a result of the experimental measurement results, the best results in terms of the density, MOR, and MOE were achieved with the AAPAPAA-layered LVL.en_US
dc.identifier.doi10.15376/biores.13.4.8653-8661
dc.identifier.endpage8661en_US
dc.identifier.issn1930-2126
dc.identifier.issue4en_US
dc.identifier.scopus2-s2.0-85073802213en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage8653en_US
dc.identifier.urihttps://doi.org/10.15376/biores.13.4.8653-8661
dc.identifier.urihttps://hdl.handle.net/20.500.12491/9697
dc.identifier.volume13en_US
dc.identifier.wosWOS:000454215100108en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorİlçe, Abdullah Cemil
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectAshen_US
dc.subjectRed Pineen_US
dc.subjectLVLen_US
dc.subjectModulus of Ruptureen_US
dc.subjectElasticityen_US
dc.subjectDensityen_US
dc.titleMechanical properties of laminated veneer lumber made from ash and red pine woodsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
abdullah-cemil-ilce.pdf
Boyut:
639.21 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Endüstri Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu