Experimental failure analysis of glass-epoxy laminated composite bolted-joints with clearance under preload

Basit Öğe Kaydı
dc.authorid0000-0001-8058-1690
dc.authorid0000-0003-4211-8966
dc.contributor.authorŞen, Faruk
dc.contributor.authorPakdil, Murat
dc.contributor.authorSayman, Onur
dc.contributor.authorBenli, Semih
dc.date.accessioned2021-06-23T19:28:17Z
dc.date.available2021-06-23T19:28:17Z
dc.date.issued2011
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, a failure analysis of glass-epoxy laminated composite bolted-joints with bolt/hole clearance under various torques was carried out. To estimate the effects of joint geometry and fiber orientation on the failure strength and failure mode, parametric studies were conducted experimentally. The two different geometrical parameters were the edge distance-to-hole diameter ratio (E/D) and plate width-to-hole diameter ratio (W/D), E/D ratio was selected from 1 to 5, and W/D ratio was chosen from 2 to 5. The bolt preload torque was also carried out as 0, 3, and 6 Nm. To investigate the material parameters effect, laminated plates were oriented as three different stacking sequences [90(o)](8), [45(o)](8), and [0(o)](8). The experiments were carried out with a clearance between the diameters of the bolt and the circular hole of 5 and 6 mm, respectively. According to experimental results, failure mode and bearing strength are strongly influenced by both material parameters and geometrical parameters. Additionally, when a torque is applied to the bolted-joints, the failure mechanism is affected by its increasing values.en_US
dc.identifier.doi10.1177/1056789509344039
dc.identifier.endpage178en_US
dc.identifier.issn1056-7895
dc.identifier.issn1530-7921
dc.identifier.issue2en_US
dc.identifier.scopus2-s2.0-84997907671en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage163en_US
dc.identifier.urihttps://doi.org/10.1177/1056789509344039
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6988
dc.identifier.volume20en_US
dc.identifier.wosWOS:000288497700001en_US
dc.identifier.wosqualityQ1en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorPakdil, Murat
dc.language.isoenen_US
dc.publisherSage Publications Ltden_US
dc.relation.ispartofInternational Journal Of Damage Mechanicsen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectGlass-epoxy Compositesen_US
dc.subjectLaminated Compositesen_US
dc.subjectBolted Jointsen_US
dc.subjectBearing Strengthen_US
dc.subjectFailure Analysisen_US
dc.titleExperimental failure analysis of glass-epoxy laminated composite bolted-joints with clearance under preloaden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
faruk-sen.pdf
Boyut:
503.78 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu