Determination of surface roughness based on the sanding parameters of oriental beech wood

Basit Öğe Kaydı
dc.contributor.authorİlçe, Abdullah Cemil
dc.date.accessioned2021-06-23T19:50:13Z
dc.date.available2021-06-23T19:50:13Z
dc.date.issued2018
dc.departmentBAİBÜ, Mühendislik Fakültesi, Endüstri Mühendisliği Bölümüen_US
dc.description.abstractThis study demonstrated the strength of a theoretical model founded on the Box-Behnken experimental design method to determine the surface roughness (R-a parameter) of solid Oriental beech (Fagus orientalis Lipsky) wood. The working parameters (sanding belt grit size of 60 to 100, feeding speed of 4 m/min to 10 m/min, and sanding cutting depth of 0.1 mm to 0.3 mm) of a wide belt sanding machine were determined. The R-a of the samples was experimentally described so that the experimental results were also remodeled with the Box-Behnken method to find the optimum parameters for the lowest R-a. An adjusted correlation factor of 93.6% for the R-a confirmed the compatibility between the experimental and theoretical findings. The high correlation (strength) allowed for a more detailed discussion of the effect of the working parameters on the R-a. The theoretical approach showed that the grit size factor had the largest effect on the R-a compared with the other factors. The optimum parameters were found to be a grit size of 100, feed speed of 4 m/min, and sanding depth of 0.1 mm for a minimum R-a for Oriental beech wood. The experimental data supported these parameters.en_US
dc.identifier.endpage5952en_US
dc.identifier.issn1930-2126
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85071940500en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage5942en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12491/9730
dc.identifier.urihttps://ojs.cnr.ncsu.edu/index.php/BioRes/issue/view/80
dc.identifier.volume13en_US
dc.identifier.wosWOS:000440506300084en_US
dc.identifier.wosqualityQ2en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorİlçe, Abdullah Cemil
dc.language.isoenen_US
dc.publisherNorth Carolina State Univ Dept Wood & Paper Scien_US
dc.relation.ispartofBioresourcesen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectSurface Roughnessen_US
dc.subjectBox-Behnken Designen_US
dc.subjectGrit Sizeen_US
dc.subjectFeed Speeden_US
dc.subjectSanding Thicknessen_US
dc.titleDetermination of surface roughness based on the sanding parameters of oriental beech wooden_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
abdullah-cemil-ilce.pdf
Boyut:
820.27 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Endüstri Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu