The Grey-based Taguchi method: optimisation of drilling of hybrid aluminum matrix composites

Basit Öğe Kaydı
dc.authorid0000-0002-7672-1846
dc.authorid0000-0001-8676-4789
dc.authorid0000-0002-4541-4894
dc.contributor.authorAy, Mustafa
dc.contributor.authorAltunpak, Yahya
dc.contributor.authorHartomacıoğlu, Selim
dc.date.accessioned2021-06-23T19:48:57Z
dc.date.available2021-06-23T19:48:57Z
dc.date.issued2017
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description6th Congress and Exhibition on International Advances in Applied Physics and Materials Science (APMAS) -- JUN 01-03, 2016 -- Istanbul, TURKEYen_US
dc.description.abstractThe aim of this study was to investigate the influence of cutting parameters and effect of graphite rate on cutting force and surface roughness in drilling of Al/20% SiC/5% Gr, Al/20% SiC/7.5% Gr and Al/20% SiC/10% Gr hybrid composites, fabricated by vortex method. The drilling tests are conducted with diamond-like-carbon coated cutting tools. The Grey relational analysis based Taguchi optimization method was selected to determine the optimum cutting conditions. The results show that the spindle speed ( 4500 rpm), the rate of graphite (10%) and feed (0.1 mm/rev) were found to be significant parameters for surface roughness and cutting force. The predicted values from the developed model and experimental values are found to be very similar in this study.en_US
dc.identifier.doi10.12693/APhysPolA.131.551
dc.identifier.endpage554en_US
dc.identifier.issn0587-4246
dc.identifier.issn1898-794X
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-85018680114en_US
dc.identifier.scopusqualityQ4en_US
dc.identifier.startpage551en_US
dc.identifier.urihttps://doi.org/10.12693/APhysPolA.131.551
dc.identifier.urihttps://hdl.handle.net/20.500.12491/9281
dc.identifier.volume131en_US
dc.identifier.wosWOS:000400905500059en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorAltunpak, Yahya
dc.language.isoenen_US
dc.publisherPolish Acad Sciences Inst Physicsen_US
dc.relation.ispartofActa Physica Polonica Aen_US
dc.relation.publicationcategoryKonferans Öğesi - Uluslararası - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.subjectThe Grey-Based Taguchi Methoden_US
dc.subjectOptimisation of Drilling
dc.subjectHybrid Aluminum Matrix Composites
dc.titleThe Grey-based Taguchi method: optimisation of drilling of hybrid aluminum matrix compositesen_US
dc.typeConference Objecten_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim
İsim:
m-ay.pdf
Boyut:
535.26 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam Metin/Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu