Effect of Cr content on microstructure and abrasive wear behaviour of Co-based alloys

Basit Öğe Kaydı
dc.contributor.authorSomunkıran, İlyas
dc.contributor.authorNursoy, Mustafa
dc.contributor.authorÇelik, H.
dc.date.accessioned2021-06-23T19:27:59Z
dc.date.available2021-06-23T19:27:59Z
dc.date.issued2011
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, a series of Co-Cr-Mo alloys with varying Cr contents were produced by powder metallurgy technique, and the effects of Cr content on microstructure and abrasive wear behaviour were studied. Seven different powder compositions having 15-35 wt-%Cr were used in the experiments. Homogeneously blended powders were cold compacted in a 120 kN single action press. The sintering process was carried out at 1200 degrees C for 60 min in an argon atmosphere. The effects of Cr on the microstructure and abrasion wear performance of the produced powder metallurgy alloys were investigated using SEM, energy dispersive spectroscopy and abrasion wear tests. Abrasive wear resistances were observed to have been increasing up to 27.5 wt-%Cr addition and decreasing subsequently.en_US
dc.identifier.doi10.1179/174329009X442735
dc.identifier.endpage213en_US
dc.identifier.issn0032-5899
dc.identifier.issn1743-2901
dc.identifier.issue3en_US
dc.identifier.scopus2-s2.0-79960237425en_US
dc.identifier.scopusqualityQ2en_US
dc.identifier.startpage209en_US
dc.identifier.urihttps://doi.org/10.1179/174329009X442735
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6929
dc.identifier.volume54en_US
dc.identifier.wosWOS:000292382100008en_US
dc.identifier.wosqualityQ3en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorNursoy, Mustafa
dc.language.isoenen_US
dc.publisherTaylor & Francis Ltden_US
dc.relation.ispartofPowder Metallurgyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectCobalt-based Alloysen_US
dc.subjectPowder Metallurgyen_US
dc.subjectWearen_US
dc.titleEffect of Cr content on microstructure and abrasive wear behaviour of Co-based alloysen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
ilyas-somunkiran.pdf
Boyut:
850.9 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin / Full Text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu