Investigations into the cutting and wear characteristics of TiCN-CrN coated C 80 steels

Basit Öğe Kaydı
dc.authorid0000-0002-7394-1499
dc.authorid0000-0001-8293-0022
dc.contributor.authorÇakan, Ahmet
dc.contributor.authorÖzkaner, Vedat
dc.contributor.authorYıldırım, M. Mustafa
dc.date.accessioned2021-06-23T19:25:51Z
dc.date.available2021-06-23T19:25:51Z
dc.date.issued2008
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractHard coatings of titanium carbonitrides (TiCN) and chromium nitrides (CrN) are now commonly used to protect the surfaces of cutting tools from the effects of wear and corrosion. In the work presented here the surfaces of the cutting edges of tools made of unalloyed C80 steel are coated with a thin layers of TiCN and CrN coatings using the Cathodic Arc-Vapour (CAVD) deposition technique. The cutting characteristics and wear behaviour of the cutting tools so treated were then investigated experimentally on a conventional lathe. The change in the chemical composition and properties of the nitride coated surfaces is investigated using both SEM photography with "line scan" analysis and by X-ray diffraction (XRD). Cutting tests and wear behaviour of tools, the cutting edges of which were coated with very thin TiCN and CrN coatings, were investigated directly using an on-line monitoring system. Amongst other things the results revealed the TiCN coated cutting tools to be more wear resistant than those coated with CrN coatings.en_US
dc.identifier.doi10.3139/147.100386
dc.identifier.endpage296en_US
dc.identifier.issn2195-8599
dc.identifier.issue6en_US
dc.identifier.startpage283en_US
dc.identifier.urihttps://doi.org/10.3139/147.100386
dc.identifier.urihttps://hdl.handle.net/20.500.12491/6279
dc.identifier.volume45en_US
dc.identifier.wosWOS:000258857000003en_US
dc.identifier.wosqualityQ4en_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.institutionauthorÇakan, Ahmet
dc.language.isoenen_US
dc.publisherCarl Hanser Verlagen_US
dc.relation.ispartofPraktische Metallographie- Practical Metallographyen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectTiCN-CrNen_US
dc.titleInvestigations into the cutting and wear characteristics of TiCN-CrN coated C 80 steelsen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu