On-line wear characterization of TiN-and CrN-coated DIN115CrV3 steel for cutting tools application

Basit Öğe Kaydı
dc.authorid0000-0002-1488-6098
dc.authorid0000-0002-7394-1499
dc.contributor.authorÖteyaka, Mustafa Özgür
dc.contributor.authorYıldırım, M. Mustafa
dc.contributor.authorÇakan, Ahmet
dc.date.accessioned2021-06-23T18:55:31Z
dc.date.available2021-06-23T18:55:31Z
dc.date.issued2014
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractPurpose: This study compares the material removal performance of hardened steels DIN 115CrV3 coated with TiN and CrN using PVD method.Design/methodology/approach: New on-line monitoring wear system, thermal imager, and weight loss method were used to analyze to quantify and compare with uncoated tools.Findings: The results of abrasive wear experiments showed that weight loss increased with an increase in load applied for all tools. The microstructure and chemical analysis of each of the three tools showed some traces of abrasion and galling of Manganium from the workpiece. During abrasion test, thermal imager showed lower heating on the CrN coated tools. On-line wear analysis results show that at the low cutting speed (18 m/min), TiN-coated tools performed a higher wear resistance compared to rivals while at higher cutting speed CrN slightly show superior efficiency. The microstructure analysis of the tools confirmed fracture and galling on each of the tools.Research limitations/implicationsen_US
dc.identifier.endpage31en_US
dc.identifier.issn1897-2764
dc.identifier.issue1en_US
dc.identifier.scopus2-s2.0-84921871926en_US
dc.identifier.scopusqualityQ3en_US
dc.identifier.startpage24en_US
dc.identifier.urihttps://hdl.handle.net/20.500.12491/4792
dc.identifier.urihttps://www.scopus.com/inward/record.uri?eid=2-s2.0-84921871926&partnerID=40&md5=73800535291bd3019ecac2db8a523d2e
dc.identifier.volume65en_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÇakan, Ahmet
dc.language.isoenen_US
dc.publisherInternational OCSCO World Pressen_US
dc.relation.ispartofArchives of Materials Science and Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectPVD Coatingsen_US
dc.subjectSteelen_US
dc.subjectTool Materialsen_US
dc.subjectTwo-body Abrasionen_US
dc.subjectWear Resistanceen_US
dc.titleOn-line wear characterization of TiN-and CrN-coated DIN115CrV3 steel for cutting tools applicationen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
mustafa-ozgur-oteyaka.pdf
Boyut:
1.72 MB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/ Full text
İndir

Koleksiyon

Scopus İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu