Şanal, Fatma AyşeKurt, Murat2021-06-232021-06-2320200893-21741942-4426https://doi.org/10.11607/ijp.6412https://hdl.handle.net/20.500.12491/10488Purpose:To examine microwave heating for the purpose of ceramic glazing as an alternative to conventional methods in terms of color stability. Materials and Methods: Thirty disk-shaped specimens (11 x 2 mm) of VITA VM 9, VITA VM 13, VITA VMK 95, and IPS e.max Ceram veneers were prepared (n = 30 each). The specimens were further divided into three subgroups according to surface finishing procedure (polishing, conventional oven glazing, or microwave glazing [n = 10 each]). The related surface finishing procedure was applied according to the manufacturers' instructions. Color differences (Delta E) of the ceramic samples stored in a coffee solution at 37 degrees C for 168 hours were determined using spectrophotometry. Data were analyzed using two-way ANOVA. The group differences were analyzed using Tukey HSD test. Results: Microwave-glazed specimens showed similar Delta E values to conventionally glazed specimens for the tested ceramics (P>.05). Polished specimens showed higher Delta E values than glazed specimens for the investigated ceramic materials, and the difference was significant for VITA VMK 95 and Vita VM9 (P <=.05). Conclusion: Microwave glazing has the advantage of decreasing glazing time to a few minutes and could be considered as an alternative method to conventional oven glazing and polishing with respect to color stability.eninfo:eu-repo/semantics/closedAccessMicrowave GlazingColor StabilityArticle10.11607/ijp.6412333328332323201872-s2.0-85084026958Q1WOS:000528253700012Q4