Regeneration of used frying oil
Yükleniyor...
Dosyalar
Tarih
2013
Yazarlar
Dergi Başlığı
Dergi ISSN
Cilt Başlığı
Yayıncı
Springer
Erişim Hakkı
info:eu-repo/semantics/closedAccess
Özet
Used frying oils were purified in a packed column using different amounts of silica gel (SG), aluminum oxide (AO), activated charcoal (AC), bentonite (B), magnesol XL (M), calcium carbonate (CC), zeolite (Z), bleaching earth (BE) and/or their binary, triple, and quaternary combinations. SG (15 g) improved total polar material (TPM) by 100 %, conjugated diene (CD) content by 84 %, and p-anisidine value (AV) by 104 %, while AO and M improved free fatty acid (FFA) contents by 103 and 105 %, respectively. On the other hand, AC and M bleached the color by 100 and 90 %, respectively. As the amount of adsorbent in the column increased, FFA, CD, AV, and color improved. When the amount of used sunflower oil (UO1) loaded in the column containing SL was increased, FFA, CD, AV and color values increased, while no change was observed in TPM up to 60 g of UO1. Loading UO1 at 150 A degrees C in the column caused the absorbance values at 460 nm to decrease from 0.740 to 0.240, while the amount of adsorbed tocopherol increased compared to UO1 at 25 A degrees C. The increasing number of adsorbents within the column further improved the physicochemical properties of UO1 when it was used 30 g. However, as the amount of different type of used oils (UO2, UO3 and UO4) was increased to 300 g, improvement ratios of all parameters decreased.
Açıklama
Anahtar Kelimeler
Used Frying Oil, Active Filtration, Adsorbent, Packed Column, Polar Material, Free Fatty acid
Kaynak
Journal Of The American Oil Chemists Society
WoS Q Değeri
Q2
Scopus Q Değeri
Q2
Cilt
90
Sayı
11
