Nickel plating on wood and wood composite surfaces: Characterization of surface durability

Basit Öğe Kaydı
dc.contributor.authorKelleci, Orhan
dc.contributor.authorKöksal, Süheyla Esin
dc.contributor.authorUlutepe, Erol
dc.date.accessioned2024-09-25T20:13:55Z
dc.date.available2024-09-25T20:13:55Z
dc.date.issued2023
dc.departmentAbant İzzet Baysal Üniversitesien_US
dc.description.abstractIn this study, the performance of nickel plating on wooden surfaces was investigated. Black pine (BP), medium density fiber board (MDF) and particle board (PB) were used for the wooden samples. After the sample surfaces were sanded with 200, 500 and 1000 grit sandpaper and varnished with polyurethane varnish (150 g/m2), they were nickel plated using a spray gun and compressed air. After drying the samples at room temperature for 72 h, scratch analyses were performed according to TS EN 15186 (2012) and TS EN ISO 2409 (2020) and abrasion analyses were performed according to TS EN 13329 +A. The staining resistance of the samples was determined according to the DIN 53799 standard. According to the results, surface strength of the MDF samples was lower than those of PB and BP. The scratch analysis results for the black nickel coating were lower than those for TS EN 15186 (2012). However, it was higher according to TS EN ISO 2409 (2020) scratch analysis. In terms of stain resistance, all samples were found to be resistant to water, soap, tea, and acetone stains, except for coffee stains. Upon visual examination, a slight coffee stain was observed on the sample surfaces. As a result, in the light of surface strength analysis, it was concluded that the surfaces of wooden boards are not suitable for nickel plating.en_US
dc.identifier.doi10.18182/tjf.1301786
dc.identifier.endpage424en_US
dc.identifier.issn2149-2174
dc.identifier.issn2149-3898
dc.identifier.issue4en_US
dc.identifier.startpage417en_US
dc.identifier.trdizinid1215823en_US
dc.identifier.urihttps://doi.org/10.18182/tjf.1301786
dc.identifier.urihttps://search.trdizin.gov.tr/tr/yayin/detay/1215823
dc.identifier.urihttps://hdl.handle.net/20.500.12491/14882
dc.identifier.volume24en_US
dc.indekslendigikaynakTR-Dizinen_US
dc.language.isoenen_US
dc.relation.ispartofTurkish Journal of Forestryen_US
dc.relation.publicationcategoryMakale - Ulusal Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/openAccessen_US
dc.snmzYK_20240925en_US
dc.subjectNickel coatingen_US
dc.subjectStain resistanceen_US
dc.subjectBlack pineen_US
dc.subjectAbrasion analysisen_US
dc.subjectScratch analysisen_US
dc.titleNickel plating on wood and wood composite surfaces: Characterization of surface durabilityen_US
dc.typeArticleen_US

Dosyalar

Koleksiyon

TR-Dizin İndeksli Yayınlar Koleksiyonu