Machinability of stellite-6 coatings with ceramic inserts and tungsten carbide tools

Basit Öğe Kaydı
dc.authorid0000-0002-1377-9338en_US
dc.contributor.authorÖztürk, Sabri
dc.date.accessioned2021-06-23T19:35:28Z
dc.date.available2021-06-23T19:35:28Z
dc.date.issued2014
dc.departmentBAİBÜ, Mühendislik Fakültesi, Makine Mühendisliği Bölümüen_US
dc.description.abstractIn this study, the machinability of Stellite-6 coating material was examined. For this purpose, Stellite-6 coating materials and two different types of cutting tool materials (ceramics and tungsten carbide) were used. The performance of the tool materials in the turning operation was analyzed. Two materials were compared in terms of surface roughness in different cutting speeds and feed rates. Taguchi method was used for the analysis of relationship between the surface quality and the cutting parameters. The estimated values were very close to the results of the experimental tests. Experimental and analysis results showed that whisker-reinforced ceramic insert was more suitable than tungsten carbide cutting tool for the machining of Stellite-6 coating material in terms of surface roughness. The objective of this study is to determine the ideal conditions and optimum machinability parameters for Stellite-6 coating material and to explore the appropriate cutting tool.en_US
dc.identifier.doi10.1007/s13369-014-1343-9
dc.identifier.endpage7383en_US
dc.identifier.issn2193-567X
dc.identifier.issn2191-4281
dc.identifier.issue10en_US
dc.identifier.scopus2-s2.0-84907684535en_US
dc.identifier.scopusqualityQ1en_US
dc.identifier.startpage7375en_US
dc.identifier.urihttps://doi.org/10.1007/s13369-014-1343-9
dc.identifier.urihttps://hdl.handle.net/20.500.12491/7797
dc.identifier.volume39en_US
dc.identifier.wosWOS:000341732200052en_US
dc.identifier.wosqualityN/Aen_US
dc.indekslendigikaynakWeb of Scienceen_US
dc.indekslendigikaynakScopusen_US
dc.institutionauthorÖztürk, Sabri
dc.language.isoenen_US
dc.publisherSpringer Heidelbergen_US
dc.relation.ispartofArabian Journal For Science And Engineeringen_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectStellite-6en_US
dc.subjectCoatingen_US
dc.subjectCeramicen_US
dc.subjectSurface Roughnessen_US
dc.titleMachinability of stellite-6 coatings with ceramic inserts and tungsten carbide toolsen_US
dc.typeArticleen_US

Dosyalar

Orijinal paket
Listeleniyor 1 - 1 / 1
Küçük Resim Yok
İsim:
sabri-ozturk-7797.pdf
Boyut:
878.63 KB
Biçim:
Adobe Portable Document Format
Açıklama:
Tam metin/Full text
İndir

Koleksiyon

WoS İndeksli Yayınlar Koleksiyonu
Makine Mühendisliği Bölümü Koleksiyonu
Scopus İndeksli Yayınlar Koleksiyonu