Arşiv logosu
  • English
  • Türkçe
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
Arşiv logosu
  • Koleksiyonlar
  • Sistem İçeriği
  • Analiz
  • Talep/Soru
  • English
  • Türkçe
  • Giriş
    Yeni kullanıcı mısınız? Kayıt için tıklayın. Şifrenizi mi unuttunuz?
  1. Ana Sayfa
  2. Yazara Göre Listele

Yazar "Kap, Tuncay" seçeneğine göre listele

Listeleniyor 1 - 2 / 2
Sayfa Başına Sonuç
Sıralama seçenekleri
  • Yükleniyor...
    Küçük Resim
    Öğe
    Asfalt çimentolarında bekleme süresi ve ortam sıcaklığının duktuliteye etkisi
    (2005) Özgan, Ercan; Kap, Tuncay
    Karayollarında, esnek üst yapı tabakalarından olan binder ve aşınma tabakaları trafik etkisi ile dış koşulların etkisine maruz kalmaktadır. Bu nedenle yol yüzeyinde oluşan kayma, çekme ve basma gerilmelerini de karşılamaktadır. Binder ve aşınma tabakalarının bu etkileri karşılayabilmesi için bağlayıcı olarak asfalt çimentosu kullanılmaktadır. Asfalt çimentosunun duktulite değerleri yukarıda belirtilen özelliklerin sağlanabilmesi açısından önem arz etmektedir. Bu çalışmada, asfalt çimentosunun duktulite değerleri bekleme süresi ve ortam sıcaklığı değişkenlerine göre incelenmiştir. Bu amaçla, farklı bekleme süreleri ve farklı sıcaklıklarda elde edilen duktulite değerleri ile referans duktulite değerleri karşılaştırılarak aralarındaki ilişki belirlenmeye çalışılmıştır.
  • Küçük Resim Yok
    Öğe
    Investigating the performance of the "l" type frame construction corner junctions exposed to the inclining moment
    (2008) Özgan, Ercan; Kap, Tuncay
    In this study, the performances of the corner joints prepared using by plain mortise, hidden mortise and constructional joint techniques and made from yellow pine (Pinus Sylvestris Lipsky), fire tire (Abies Nordmanniana), Chenust (Castanea Sativa Mill.) and cedar wood (Cedrus Libani A. Rich.) were investigated under the inclining moment effects. For this purpose, totally 160 unit frame construction corner junction models were prepared. It was determined after the tests that, when the yellow pine materials were used (Pinus Sylvestris Lipsky), the highest average composed inclining pressure resistance occurred with plain mortise and the lowest average pressure resistance occurred with hidden mortise in fire tire (Abies Nordmanniana) on the junctions. When dowel was used in the corner joints it was observed that the pressure resistance, under the inclining moment, increased about 3% at plain mortise and increased 9% at hidden mortis in yellow pine. The pressure resistance, under the inclining moment, decreased about 20,3% at plain mortise and decreased about 8,9% at hidden mortis in fire tree, chestnut tree. The pressure resistance, under the inclining moment, increased about 6,6% at plain mortise and decreased about 10,4% at hidden mortis in the chestnut tree. The pressure resistance, under the inclining moment, decreased about 2,4% at plain mortise and increased about 19,5% at hidden mortis in the cedar wood.

| Bolu Abant İzzet Baysal Üniversitesi | Kütüphane | Rehber | OAI-PMH |

Bu site Creative Commons Alıntı-Gayri Ticari-Türetilemez 4.0 Uluslararası Lisansı ile korunmaktadır.


Bolu Abant İzzet Baysal Üniversitesi Kütüphanesi, Bolu, TÜRKİYE
İçerikte herhangi bir hata görürseniz lütfen bize bildirin

DSpace 7.6.1, Powered by İdeal DSpace

DSpace yazılımı telif hakkı © 2002-2025 LYRASIS

  • Çerez Ayarları
  • Gizlilik Politikası
  • Son Kullanıcı Sözleşmesi
  • Geri Bildirim