Advanced Search

Show simple item record

dc.contributor.authorKaraman, Tahir
dc.contributor.authorEser, Bekir
dc.contributor.authorAltintas, Eyyup
dc.contributor.authorAtala, Mustafa Hayati
dc.date.accessioned2021-06-23T19:55:17Z
dc.date.available2021-06-23T19:55:17Z
dc.date.issued2021
dc.identifier.issn1618-1247
dc.identifier.issn1618-1255
dc.identifier.urihttps://doi.org/10.1007/s10266-020-00533-9
dc.identifier.urihttps://hdl.handle.net/20.500.12491/10769
dc.descriptionWOS:000540636700001en_US
dc.descriptionPubMed: 32537671en_US
dc.description.abstractThis study aimed to investigate the impacts of finish line type and width on the fracture resistance of provisional crowns, and to determine the suitable type of crown material to use for that purpose. Chamfer and rounded shoulder preparations were done with stainless steel master models with a width of 0.6 mm and 1.0 mm and a total convergence angle of 6 degrees. The provisional crowns were obtained using computer-aided design/computer-aided manufacturing (CAD/CAM) polymethyl methacrylate (PMMA) material in the mandibular left first molar. From the obtained molar tooth, a silicon mold was used to obtain the provisional crowns from the CAD/CAM PMMA, bis-acrylic resin, and self-curing composite materials. The lowest fracture strength was found in the bis-acrylic resin group made using the rounded shoulder preparation with a width of 0.6 mm (699 N). The highest fracture strength was found in the CAD/CAM PMMA group made using the rounded shoulder preparation with a width of 1 mm (1339 N). The fracture strength is higher for CAD/CAM PMMA than the other provisional crown materials; thus, it is recommended that this material be used in provisional crown restorations due to its other advantages.en_US
dc.language.isoengen_US
dc.publisherSpringeren_US
dc.rightsinfo:eu-repo/semantics/closedAccessen_US
dc.subjectProvisional crownen_US
dc.subjectFracture strengthen_US
dc.subjectFinish line typeen_US
dc.subjectCADen_US
dc.subjectCAM PMMAen_US
dc.subjectBis-acrylic resinen_US
dc.titleEvaluation of the effects of finish line type and width on the fracture strength of provisional crownsen_US
dc.typearticleen_US
dc.contributor.department[0-Belirlenecek]en_US
dc.contributor.authorID0000-0002-1280-1257en_US
dc.contributor.authorID0000-0002-3764-637Xen_US
dc.contributor.institutionauthor[0-Belirlenecek]
dc.identifier.doi10.1007/s10266-020-00533-9
dc.identifier.volume109en_US
dc.identifier.issue1en_US
dc.identifier.startpage76en_US
dc.identifier.endpage81en_US
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanıen_US
dc.relation.journalOdontologyen_US


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record